Find what you need.
Explore furniture hardware, bathroom products and fit-out supplies. Browse categories, compare options and share your sourcing list.
Home & furniture hardware
Furniture handles, cabinet hinges, drawer slides, kitchen and wardrobe storage, furniture mechanisms and installation fittings.
Furniture handles & hooks
Bar pulls, Cabinet knobs, Recessed & concealed pulls and related fittings.
6 subcategories↗Cabinet hinges & opening fittings
Cabinet hinges, Flap stays & gas struts, Push latches & opening devices and related fittings.
4 subcategories↗Drawer slides & drawer systems
Drawer slides, Drawer box systems, Drawer dividers & inserts and related fittings.
3 subcategories↗Kitchen cabinet storage
Dish & cookware baskets, Spice & narrow-cabinet pull-outs, Corner cabinet storage and related fittings.
9 subcategories↗Wardrobe & home storage
Wardrobe rails & brackets, Garment racks & wardrobe lifts, Trouser racks and related fittings.
9 subcategories↗Furniture mechanisms & cabinet door systems
Sliding cabinet door systems, Folding & pivoting cabinet door systems, Extendable table & concealed worktop mechanisms and related fittings.
7 subcategories↗Furniture connectors & installation fittings
Furniture screws & connectors, Shelf supports & brackets, Furniture glass clips and related fittings.
14 subcategories↗Bathroom & plumbing
Faucets, showers, kitchen sinks, washbasins, sanitaryware, bathroom cabinets, accessories and plumbing fittings.
Faucets & taps
Basin faucets, Kitchen faucets, Utility & cleaning taps and related fittings.
3 subcategories↗Shower & rinsing equipment
Showers & shower sets, Hand showers & shower heads, Rinsing & bidet sprays and related fittings.
5 subcategories↗Kitchen sinks & accessories
Kitchen sinks, Draining baskets & sink accessories and related fittings.
2 subcategories↗Washbasins & utility sinks
Washbasins & basin bowls, Pedestal basins, Integrated countertop basins and related fittings.
4 subcategories↗Sanitaryware
Conventional toilets, Smart toilets, Squat pans and related fittings.
6 subcategories↗Bathroom cabinets & mirror cabinets
Bathroom vanities, Balcony & laundry cabinets, Bathroom mirrors and related fittings.
4 subcategories↗Bathroom accessories & storage
Towel bars & racks, Bathroom shelves, Toilet paper holders & tissue boxes and related fittings.
7 subcategories↗Plumbing & installation fittings
Angle valves & water inlet controls, Floor drains, Basin wastes & drainage fittings and related fittings.
6 subcategories↗Fit-out & project supplies
Door locks and controls, glass door hardware, lighting, switches, sockets, ventilation, surface finishes and installation supplies.
Door locks & door control hardware
Mechanical door locks, Smart & fingerprint locks, Concealed door locks and related fittings.
8 subcategories↗Glass door installation hardware
Glass door handles, Glass door patch fittings & connectors, Floor springs and related fittings.
4 subcategories↗Lighting & control accessories
Pendant lights, Ceiling lights, Wall lights and related fittings.
10 subcategories↗Switches, sockets & ventilation
Wall switches & socket plates, Track power sockets, Circuit breakers & residual-current protection and related fittings.
8 subcategories↗Wall finishes, floor finishes & trims
Flexible decorative cladding, Stone-effect decorative panels, Glass blocks & decorative glass bricks and related fittings.
9 subcategories↗Adhesives, sealants & installation supplies
Glazing & joint sealants, Expanding foam, Mounting adhesives and related fittings.
5 subcategories↗Product models
Specifications, availability and destination requirements are confirmed before quotation.
Soft-Foot Cabinet Pulls and Knob
A soft-foot series in brushed gold colour, with a single-hole knob and pulls in three hole-centre sizes. Finish/colour: Brushed gold colour. Source-photo dimensions: height 30 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0170 · 4 specification options
Black-Face Gold-Frame Cabinet Pull and Knob
A black face with a gold-coloured frame, offered as a single-hole knob and a 96 mm pull. Finish/colour: Gold colour and black. Source-photo dimensions: overall length 32 mm; width 32 mm; height 29 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0183 · 2 specification options
Round-Bar Cabinet Pulls and Round-Head Knobs
A series of round-bar pulls and round-head knobs in gold colour and pearl grey, each with a single-hole knob and pulls with 96 mm or 128 mm hole centres. Finish/colour: Gold colour. Source-photo dimensions: overall length 17 mm; width 17 mm; height 32 mm.
A0177 · 6 specification options
Rectangular Framed-Face Cabinet Pull
A rectangular framed face with a flat central panel in iron grey, retaining the 160 mm hole-centre option. Finish/colour: Iron grey. Hole centres: 160 mm. Source-photo dimensions: overall length 180 mm; width 45 mm; height 25 mm. The supplied item is one pull in the selected 160 mm size. The smaller example in the image illustrates the series only. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0169
Stepped-Edge Cabinet Pulls and Knob
A stepped-edge series with a single-hole knob and pulls in two hole-centre sizes. Finish/colour: Matte black. Source-photo dimensions: overall length 30 mm; width 30 mm; height 30 mm.
A0166 · 3 specification options
Square-Foot Cabinet Pulls and Round Knob
A coordinated iron-grey series of straight pulls with square feet and a round knob with a waisted base, available as a single-hole knob or pulls in two fixing-spacing sizes. Finish/colour: Iron grey. Source-photo dimensions: overall length 34 mm; width 34 mm; height 25 mm.
A0163 · 3 specification options
Tall Rounded-Backplate Hook
A tall rounded backplate with a short hook for hanging garments, hats and everyday small items. Finish/colour: Pearl grey.
A0162
Brown-Insert Framed Pulls and Knobs
A brown textured insert within a brushed copper-coloured frame, offered as small and large knobs and a bar pull. Finish/colour: Brushed copper colour and brown. Source-photo dimensions: overall length 28 mm; width 28 mm; height 25 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0174 · 3 specification options
Round-Backplate Upturned Hook
A round backplate with an upturned hook for hanging garments and everyday small items. Finish/colour: Matte black.
A0161
Silver-Edged Rounded Flat Profile Pull
A rounded flat-profile grip in matte black with a silver-coloured edge. Finish/colour: Matte black with silver-coloured edge. Hole centres: 96 mm. Source-photo dimensions: overall length 120 mm; width 7.2 mm; height 26.8 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0136 · 3 specification options
Flat-End Textured-Face Profile Pull
A flat-ended profile pull with a fine-textured grip face, available in dark grey with 96 mm hole-centre and 1 m overall-length options. Finish/colour: Dark grey. Hole centres: 96 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0134 · 2 specification options
Double-Curved-Edge Profile Cabinet Pull
A double-curved-edge profile grip in brushed antique-bronze colour. The source shows upper and lower profile widths of 9.7 mm and 14.7 mm. Finish/colour: Brushed antique-bronze colour. Hole centres: 96 mm. Source-photo dimensions: overall length 120 mm; height 17 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0131 · 3 specification options
Fluted-Face Profile Pull
A slim fluted-face profile pull, available in black, gold colour and dark grey, with two fixing-spacing sizes and a 1 m overall-length option. Finish/colour: Matte black. Hole centres: 96 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0122 · 9 specification options
Side-Grip Linear Cabinet Pull
A linear profile with a side grip,1000 mm in overall length with three fixing holes, offered in brushed grey, brushed antique-bronze colour and black. Check all three fixing positions on the actual item before installation. Finish/colour: Black. Source-photo dimensions: overall length 1000 mm.
A0119 · 3 specification options
Blue-Insert Folding Pull with Silver-Coloured Frame
A rectangular blue insert with a satin-brushed silver-coloured frame. Finish/colour: Satin-brushed finish and blue. Hole centres: 64 mm.
A0160
Rectangular Folding Cabinet Pull
A rectangular frame with a folding grip plate in pearl grey, with 64 mm fixing-hole centres. Finish/colour: Pearl grey. Hole centres: 64 mm.
A0159
Rectangular Open-Frame Folding Pull
A rectangular open ring within an outer frame, with a brushed copper-coloured finish. Finish/colour: Brushed copper colour. Hole centres: 64 mm.
A0158
Stepped Rectangular Folding Pull
A stepped rectangular face with a folding grip for a flat appearance when closed. Finish/colour: Matte black.
A0157
Oval Flush Folding Pull
An oval flush folding grip with a pearl-grey finish. Finish/colour: Pearl grey. Hole centres: 64 mm. Source-photo dimensions: overall length 73 mm; width 38 mm.
A0156
Oval Swivel Ring Pull
An elongated oval plate with a swivelling ring grip in pearl nickel colour. Supplied as one pull; the image shows front and reverse views of the same type, not a two-piece set. Finish/colour: Pearl nickel colour.
A0154
Oval Flush Concealed Folding Pull
An oval flush face concealing a folding ring grip, with an iron-grey finish. Finish/colour: Iron grey. Hole centres: 85 mm. Source-photo dimensions: overall length 100 mm; width 20 mm.
A0153
Square Folding Ring Pull
A square folding ring pull with single-hole fixing. Finish/colour: Matte black. Source-photo dimensions: overall length 42 mm; width 40 mm.
A0152
Round Folding Ring Pull
A silver round ring pull in the small size. Finish/colour: Silver. Source-photo dimensions: overall length 36 mm; width 36 mm.
A0151
Bright-Edged Rectangular Plate Pull
A rectangular plate-style pull with a brushed-silver face and bright edges, available in medium and large sizes. Finish/colour: Brushed silver. Source-photo dimensions: overall length 49 mm; width 37 mm.
A0149 · 2 specification options
Rounded-Rectangle Folding Pull
A rounded rectangular face, available in small and large sizes. Finish/colour: Matte black. Source-photo dimensions: overall length 43 mm; width 35 mm.
A0147 · 2 specification options
Plain Rectangular Folding Pull
A flat rectangular face in satin nickel colour. Fixing spacing follows the original option designation; check actual fixing positions before installation. Finish/colour: Satin nickel colour. Hole centres: 64 mm.
A0146
Oval Folding Ring Pull
An oval ring pull with an amber-red finish. Finish/colour: Amber red. Hole centres: 64 mm. Source-photo dimensions: overall length 75 mm; width 35 mm.
A0145
Semicircular Folding Pull with Long Plate
A semicircular folding grip with an elongated plate and brushed-silver finish, offered in two source-designated materials. Finish/colour: Brushed silver. Selected material: zinc alloy, as designated by the source. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0143 · 2 specification options
Recessed Semicircular Folding Pull
A semicircular folding grip with a recessed mounting plate and a black finish. Finish/colour: Matte black. Hole centres: 90 mm. Source-photo dimensions: overall length 104 mm.
A0155
D-Shaped Folding Cabinet Pull
A D-shaped folding grip, available in small and large sizes. Finish/colour: Matte black. Source-photo dimensions: overall length 35 mm; width 35 mm.
A0141 · 2 specification options
Silver-Edged Round-Ended Flat Profile Pull
A round-ended flat-profile grip in matte black with a fine silver-coloured edge. Finish/colour: Matte black with silver-coloured edge. Hole centres: 128 mm. Source-photo dimensions: overall length 150 mm; width 11.5 mm; height 19.5 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0139 · 2 specification options
Concentric-Ring Cabinet Knob
A round head with concentric rings and a waisted base in matte black, for single-hole fixing. Finish/colour: Matte black.
A0090
Slim Soft-Corner Cabinet Pull
A slim grip with softly rounded corners in pearl grey, with 128 mm fixing-hole centres. Finish/colour: Pearl grey. Hole centres: 128 mm.
A0082
Domed Mushroom Cabinet Knob
A domed mushroom-shaped face with a short base for single-hole fixing. Finish/colour: Pearl grey.
A0095
Domed Step-Rim Cabinet Knob
A domed round face with a stepped rim and waisted base, with single-hole fixing. Finish/colour: Pearl grey. Source-photo dimensions: overall length 32 mm; width 32 mm; height 32 mm. Face diameter 32 mm and base diameter 14 mm. Check panel thickness and screw length before fitting. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0087 · 2 specification options
Two-Tone Silver Rectangular Recessed Pull
A rectangular recessed grip with a two-tone silver finish. Finish/colour: Two-tone silver. Hole centres: 96 mm. Source-photo dimensions: overall length 100 mm; width 40 mm.
A0101
Decorated Bowed Cabinet Pull
A bowed grip with decorated ends in coffee brown, with 128 mm fixing-hole centres. Finish/colour: Coffee brown. Hole centres: 128 mm.
A0079
Soft-Curve Cabinet Pull with Tapered Feet
A softly curved grip with tapered end feet in matte black, with 128 mm fixing-hole centres. Finish/colour: Matte black. Hole centres: 128 mm.
A0080
Hollow Stainless-Steel Cabinet Knob
A round-headed hollow stainless-steel knob for single-hole mounting. Material follows the source designation; no steel grade is specified. Finish/colour: Silver. Source-photo dimensions: overall length 25 mm; width 25 mm; height 25 mm.
A0083
Compact Key-Pattern Cabinet Knob
A compact grip with a bent base, a geometric key-pattern face and an antique coffee-brown finish. Finish/colour: Antique coffee brown. Source-photo dimensions: overall length 40 mm; width 23 mm; height 25 mm.
A0084
Flat Round-Head Cabinet Knob
A flat round head with a waisted base and an antique coffee-brown finish, for single-hole fixing. Finish/colour: Antique coffee brown. Source-photo dimensions: overall length 30 mm; width 30 mm; height 30 mm.
A0085
Decorative-Rim Round Cabinet Knob
A round face with a decorative inset rim for single-hole fixing. The source shows a 32 mm face diameter and an 11 mm base diameter. Finish/colour: Chrome colour. Source-photo dimensions: height 28 mm.
A0086
Stitched-Trim Recessed Pull
An iron-grey recessed grip with a black stitched-texture trim. Finish/colour: Iron grey and black. Source-photo dimensions: overall length 175 mm; width 55 mm; height 25 mm.
A0102
Centre-Grip Edge-Mounted Cabinet Pull
An edge-mounted strip with a central grip opening in black, offered in 300 mm overall length with two fixing holes or 1000 mm with three. The source indicates 17.5–18.3 mm panels, about 1.2 mm profile thickness and about 20 mm grip opening. Check against the actual item before installation. Finish/colour: Matte black. Source-photo dimensions: overall length 300 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0117 · 2 specification options
End-Capped Linear Cabinet Pull
A straight grip with closed ends, offered in the actual in-stock gold-colour and black forms. Finish/colour: Gold colour. Hole centres: 128 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0112 · 5 specification options
Linear Profile Cabinet Pull with Raised Edge
A linear profile grip with a raised-edge outline in black, offered in four hole-centre sizes. Finish/colour: Matte black. Hole centres: 128 mm. Source-photo dimensions: overall length 130 mm; width 18 mm; height 20 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0108 · 4 specification options
Left-and-Right Rectangular Recessed Pull Pair
Rectangular recessed grips in pearl grey with 64 mm fixing-hole centres. Supplied as a left-and-right pair, one of each; the two pieces in the main image represent the supplied pair. Finish/colour: Pearl grey. Hole centres: 64 mm.
A0107
Square and Rectangular Recessed Flap Pulls
A recessed flap grip, offered in a small square form and a large rectangular form. Finish/colour: Iron grey. Source-photo dimensions: overall length 45 mm; width 45 mm; height 13 mm. The small form has single-hole fixing. The source shows a 40.5 × 40.5 × 12 mm recess; verify the actual fitting before cutting. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0105 · 2 specification options
Round Recessed Pull with Central Grip
A round recessed dish with a central grip. The source specifies a 50 mm cut-out size; check the actual fitting before installation. Finish/colour: Pearl grey.
A0104
Left-and-Right Rectangular Recessed Pull Pair
A matching left-and-right pair of rectangular recessed grips in iron grey. The supplied pair contains one left and one right pull. Illustrated dimensions apply to one pull. Finish/colour: Iron grey. Hole centres: 192 mm. Source-photo dimensions: overall length 200 mm; width 52 mm; height 25 mm.
A0103
Silver-Frame Recessed Pull with Black Grip
A silver-coloured rectangular frame surrounding a black ribbed finger recess. Finish/colour: Silver colour and black. Source-photo dimensions: overall length 115 mm.
A0100
Round Stainless-Steel Recessed Pull
A round recessed finger cup, designated as stainless steel by the source; no steel grade is specified. Finish/colour: Silver. Source-photo dimensions: overall length 40 mm; width 40 mm; height 10 mm.
A0099
Round-Face Low-Base Cabinet Knob
A round face with a low base for single-hole fixing, offered in brushed copper colour, textured black and pearl grey. Finish/colour: Brushed copper colour. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0096 · 3 specification options
Stepped-Rim Cabinet Knob with Waisted Stem
A round face with a stepped rim and waisted base for single-hole fixing. Finish/colour: Pearl grey.
A0094
Flat-Round Cabinet Knob with Short Stem
A flat round face with a short cylindrical stem for single-hole fixing. Finish/colour: Matte black.
A0093
Soft-Square Cabinet Knob
A softly rounded square face for single-hole fixing. Finish/colour: Brushed copper colour.
A0092
Domed Cabinet Knob with Tapered Stem
A domed round face with a tapered base for single-hole fixing. Finish/colour: Brushed copper colour.
A0091
Butterfly-Form Cabinet Knob
A butterfly-shaped face with a pearl-grey finish and two-hole fixing. Finish/colour: Pearl grey. Hole centres: 16 mm. Source-photo dimensions: overall length 52 mm; width 47 mm; height 19 mm.
A0089
Straight-Bar Cabinet Pull with Square Feet
A straight grip with square end feet in matte black, with 128 mm fixing-hole centres. Finish/colour: Matte black. Hole centres: 128 mm.
A0081
Soft-Corner Metallic-Colour Cabinet Pulls
Soft-corner straight grips, offered in gold colour with 96 mm hole centres and brushed copper colour with 128 mm hole centres. Finish/colour: Gold colour. Hole centres: 96 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0052 · 2 specification options
Flat-Bar Cabinet Pull with Offset Feet
A flat grip with offset end feet in iron grey, supplied according to the selected fixing-hole centres. Finish/colour: Iron grey. Hole centres: 128 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0020 · 3 specification options
Shaped-Grip Cabinet Pull with Broad Feet
A shaped curved grip with broad end supports, available in two hole-centre sizes. Finish/colour: Textured black. Hole centres: 96 mm. Source-photo dimensions: overall length 140 mm; width 15 mm; height 25 mm.
A0023 · 2 specification options
Flat-Bar Cabinet Pull with Rounded Block Feet
A straight flat grip with rounded block feet in matte black, available in three hole-centre sizes. Finish/colour: Matte black. Hole centres: 96 mm. Source-photo dimensions: overall length 110 mm; width 10 mm; height 23 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0025 · 3 specification options
Raised Oval White-Centre Cabinet Pull
A raised oval white grip with curved black end supports. Finish/colour: Black and white. Hole centres: 128 mm.
A0028
Slim Soft-Corner Cabinet Pull
A slim grip with softly rounded corners in pearl gold, available in three hole-centre sizes. Finish/colour: Pearl gold. Hole centres: 96 mm. Source-photo dimensions: overall length 100 mm; width 5 mm; height 30 mm.
A0029 · 3 specification options
Slim-Bar Cabinet Pull with Broad Feet
A slim bar with broad end feet in black, available in four hole-centre sizes. Finish/colour: Matte black. Hole centres: 96 mm. Source-photo dimensions: overall length 110 mm; width 5 mm; height 26 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0032 · 4 specification options
Slim Flat-Foot Cabinet Pull
A slim straight grip with flat end supports, retaining three actual hole-centre options. Finish/colour: Matte black. Hole centres: 96 mm. Source-photo dimensions: overall length 110 mm; width 5 mm; height 26 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0036 · 3 specification options
Fluted White-Centre Cabinet Pull with Ball Ends
A white fluted grip with gold-coloured ball ends and mounting bases. Finish/colour: Gold colour and white. Hole centres: 96 mm. Source-photo dimensions: overall length 115 mm; width 16 mm; height 35 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0039
Soft-Rectangular Cabinet Pull
A softly rounded rectangular grip in light gold colour, available in two hole-centre sizes. Finish/colour: Light gold colour. Hole centres: 96 mm. Source-photo dimensions: overall length 110 mm; width 12 mm; height 25 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0040 · 2 specification options
Twin-Rail Cabinet Pull with Square Feet
A twin-rail grip with square end feet and a black finish, available in three actual hole-centre sizes. Finish/colour: Matte black. Hole centres: 160 mm. Source-photo dimensions: overall length 175 mm; width 18 mm; height 25 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0042 · 3 specification options
Round-Face Short Cabinet Pull
A short cabinet pull with a circular face in pearl grey, with 32 mm fixing-hole centres. Finish/colour: Pearl grey. Hole centres: 32 mm. Source-photo dimensions: overall length 84 mm; width 34 mm; height 21 mm. The supplied item is one pearl-grey pull. Other colours shown are same-series illustrations and are not included. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0045
White-Edged Linear Cabinet Pull
A linear black grip with a white edge, offered in three hole-centre sizes and a 1 m overall-length form. Finish/colour: Black with white edge. Hole centres: 96 mm. Source-photo dimensions: overall length 120 mm; height 20 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0046 · 4 specification options
Light-Edged Flat Cabinet Pull
A flat black grip outlined by a fine light-coloured edge, available in two hole-centre sizes. Finish/colour: Matte black. Hole centres: 96 mm. Source-photo dimensions: overall length 116 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0050 · 2 specification options
Soft-Corner U-Shaped Cabinet Pull
A soft-corner U-shaped rectangular grip in black, available in three hole-centre sizes. Finish/colour: Matte black. Hole centres: 96 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0054 · 3 specification options
Rounded-End Flat Cabinet Pull
A flat grip with rounded ends, available in gold colour and black in the actual offered fixing-spacing and length combinations. Finish/colour: Gold colour. Hole centres: 96 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0057 · 5 specification options
Slender Round-Bar Cabinet Pull with Circular Bases
A slender round bar with circular end bases in gold colour, available in four hole-centre sizes. Finish/colour: Gold colour. Hole centres: 96 mm. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0062 · 4 specification options
Round-Bar Cabinet Pull with Disc Bases
A round-bar grip with circular disc bases and a black finish, retaining the 96 mm and 192 mm hole-centre options. Finish/colour: Matte black. Hole centres: 96 mm. Source-photo dimensions: overall length 110 mm; width 15 mm; height 30 mm. The supplied item is one bar pull in the selected hole-centre size. The knob and other sizes shown are not included. The image illustrates the same product series, not a multi-piece set. The selected option determines the supplied type, colour and size.
A0066 · 2 specification options
Faceted Cabinet Pull with Sloping Feet
A faceted grip with sloping end supports and a black finish. Finish/colour: Matte black. Hole centres: 128 mm.
A0068
Round-Bar Cabinet Pull with Concentric Bases
A round-bar grip with concentric circular bases, available in pearl grey and black. Finish/colour: Pearl grey. Hole centres: 128 mm. Source-photo dimensions: overall length 143 mm; width 10 mm; height 30 mm.
A0069 · 2 specification options
Flat-Bar Cabinet Pull with Oval Feet
A straight flat grip with oval end feet and a black finish. Finish/colour: Matte black. Hole centres: 128 mm.
A0071
Textured-Segment Linear Cabinet Pull
A straight grip with a textured segment and a pearl-grey finish. Finish/colour: Pearl grey. Hole centres: 128 mm. Source-photo dimensions: overall length 158 mm; height 32 mm.
A0072
Faceted Cabinet Pull with Angled Bases
A faceted grip with broad angled bases, available in brushed copper colour and pearl grey. Finish/colour: Brushed copper colour. Hole centres: 128 mm. Source-photo dimensions: overall length 157 mm; height 28 mm.
A0073 · 2 specification options
Antique Framed Cabinet Pull with Key-Pattern Ends
A framed straight grip with key-pattern end supports and an antique-green finish. Finish/colour: Antique green colour. Hole centres: 128 mm.
A0075
Flat-Bridge Cabinet Pull with Square Feet
A flat bridge grip with square end feet and a matte-black finish. Finish/colour: Matte black. Hole centres: 128 mm.
A0076
Two-Tone Greek-Key Cabinet Pull
A black grip with brass-coloured lines and a Greek-key decorative motif. Finish/colour: Black and brass colour. Hole centres: 128 mm.
A0077
Framed-Centre Cabinet Pull with Key-Pattern Ends
A framed central grip with key-pattern end supports and a coffee-brown finish. Finish/colour: Coffee brown. Hole centres: 128 mm.
A0078
Colourful Curved Cabinet Pull with Round Bases
A curved bar with round mounting bases, available in blue and pink with two hole-centre options. Finish/colour: Blue. Hole centres: 96 mm. Source-photo dimensions: overall length 115 mm; width 10 mm; height 27 mm.
A0001 · 4 specification options
Linear Aluminium Cabinet Pull
A linear aluminium pull with a two-tone silver finish. Finish/colour: Two-tone silver. Hole centres: 96 mm. Source-photo dimensions: overall length 104 mm; width 8 mm; height 16 mm.
A0019
Angular Cabinet Pull with Flat Feet
An angular grip with flat mounting feet, available in two hole-centre sizes. Finish/colour: Textured black. Hole centres: 96 mm. Source-photo dimensions: overall length 144 mm; width 20 mm; height 35 mm.
A0017 · 2 specification options
Oval White-Centre Cabinet Pull
An oval white central grip with curved black end supports, available in two hole-centre sizes. Finish/colour: Black and white. Hole centres: 76 mm. Source-photo dimensions: overall length 113 mm; height 40 mm.
A0015 · 2 specification options
Key-Pattern Cabinet Pull with Square Feet
A straight grip with a central key-pattern detail and square end feet, retaining three actual hole-centre options. Finish/colour: Antique coffee brown. Hole centres: 96 mm. Source-photo dimensions: overall length 105 mm; width 20 mm; height 28 mm.
A0005 · 3 specification options
Slender White-Centre Cabinet Pull
An elongated white central grip with curved black end supports. Finish/colour: Black and white. Hole centres: 128 mm. Source-photo dimensions: overall length 142 mm; width 12 mm; height 32 mm.
A0014
Round-Bar Cabinet Pull with Round Bases
Matte-black cabinet pull with a rounded bar and two round mounting bases. Hole centres: 96 mm. The source photo specifies an overall length of 115 mm, width of 20 mm and height of 35 mm. Select the required hole centres.
A0012 · 2 specification options
Slim Curved Cabinet Pull with Oval Ends
A slim curved grip with oval end supports, available in two hole-centre sizes. Finish/colour: Matte black. Hole centres: 96 mm. Source-photo dimensions: overall length 135 mm; width 10 mm; height 20 mm.
A0010 · 2 specification options
Faceted-Centre Cabinet Pull
A cabinet pull with a faceted central detail and polygonal end supports. Finish/colour: Antique green. Hole centres: 96 mm. Source-photo dimensions: overall length 110 mm; width 25 mm; height 30 mm.
A0009
Stepped-Edge Cabinet Pull
A gently curved grip with stepped end supports. Finish/colour: ORB dark finish. Hole centres: 96 mm. Source-photo dimensions: overall length 107 mm; width 18 mm; height 30 mm.
A0008
Glass-Base Cabinet Pull-Out Basket
Glass-base cabinet pull-out basket for 800 mm or 900 mm cabinets; see options for listed internal clear widths. The dish basket and flat basket form an upper/lower storage combination with glass bases.
S0006 · 2 specification options
Taro Gray Aluminum Cabinet Pull-Out Basket
Taro gray aluminum cabinet basket; choose by cabinet width and storage configuration.
S0001 · 5 specification options
Gunmetal Pull-Out Kitchen Faucet
Pull-out kitchen sink faucet with a gunmetal finish, supplied as a set. Equipped with a ceramic cartridge.
V0011
Stainless Steel Angle Valve
Electroplated stainless steel angle valve, single-piece configuration. Ceramic-disc cartridge and 1/2-inch connections. Illustrated height: 90 mm; handle width: 35 mm.
Y0026
Black 3D-Adjustable Concealed Door Hinge
Black concealed hinge with three-way adjustment. One pair contains two hinges, with a 60 kg load capacity per pair and 30 kg per hinge. Suitable for left- or right-hand installation, with adjustment possible without removing the door leaf.
P0004
No-Drill Handheld Spray Set
Adhesive-mounting spray set consisting of a valve, handheld sprayer, retractable hose and holder. Illustrated sprayer length: 15 cm; reference valve dimensions: 5.6 × 8.7 cm; reference holder baseplate dimensions: 7.8 × 11.5 cm. The holder uses no-drill installation.
W0005
5-Inch Automatic Closing Door Hinge
Black automatic-closing door hinge in a 5-inch size, with a 26 kg load capacity. Closing force and closing speed are adjustable.
P0003
Gunmetal Stainless Steel Floor Drain
Gunmetal stainless steel floor drain in several panel sizes and single- or dual-use configurations.
Y0020 · 6 specification options
Polished Copper Kitchen Faucet
Copper kitchen sink faucet with a polished finish. Electroplated finish with a ceramic-disc cartridge.
V0008
Gunmetal Copper Basin Faucet
Copper basin faucet with a gunmetal finish. Electroplated finish with a ceramic-disc cartridge.
V0007
Polished Handheld Spray Set
Polished handheld spray set with a holder.
W0004
Gunmetal Handheld Spray
Handheld spray in a gunmetal finish.
W0003
Kitchen Faucet with Ball-Bearing Swivel
Kitchen faucet with a ball-bearing mechanism. Equipped with a removable aerator and hot/cold water inlets, with a brushed finish.
V0006
Stainless Steel Door Holder
Stainless steel door holder available in black or gray. Each piece is blister-packed. Available in the two actual options: black and grey.
P0001 · 2 specification options
Polished Cold-Water Kitchen Faucet
Kitchen sink faucet with a polished finish for cold water.
V0010
Grey Stainless Steel Round Shower Set
Grey stainless steel shower set with a round overhead shower and a handheld shower.
W0002
Polished Stainless Steel Round Shower Set
Stainless steel shower set with a polished finish, a round overhead shower and a handheld shower.
W0001
Gunmetal Copper Square Floor Drain
Gunmetal copper square floor drain available in single- and dual-use configurations.
Y0018 · 2 specification options
Gunmetal Pull-Out Faucet in 304 Stainless Steel
304 stainless steel kitchen faucet with a gunmetal finish and pull-out spray.
V0005
Polished Brass Basin Faucet
Brass basin faucet with a polished finish. Supports mixed hot and cold water and includes an outlet aerator. Illustrated overall dimensions: 185 × 175 mm.
V0004
Stainless Steel Corrugated Hose
Stainless steel corrugated hose available in 40, 60, and 80 cm lengths. Corrugated body with threaded fittings. The illustrated internal opening diameter is 13 mm.
Y0015 · 3 specification options
Large-Cap Pop-Up Drain with Overflow
Pop-up drain with a large cap and overflow opening. Stainless steel construction with a polished finish. Illustrated overall length: 220 mm; tube diameter: 30 mm.
Y0014
Flexible Connection Hose
Flexible hose available in 40, 60, and 80 cm lengths. Stainless steel braided outer layer, copper fittings and an EPDM inner tube, with 1/2-inch connections.
Y0011 · 3 specification options
Polished Hot and Cold Kitchen Faucet
Kitchen sink faucet with a polished finish for hot and cold water connections.
V0009
Water Connection Hose
Water connection hose available in lengths from 30 to 100 cm. Braided outer layer with threaded ends. Length follows the selected specification.
Y0005 · 6 specification options
Pop-Up Drain
Pop-up drain fitting. Stainless steel construction with a polished finish and an overflow opening.
Y0003
Stainless Steel Split-Type Single-Bowl Sink Set
Stainless steel split-type sink set with size and faucet-hole options; matching drain fitting included. The single bowl has rounded internal corners and an overflow opening. Dimensions and tap-hole configuration follow the selected specification.
F0001 · 5 specification options
Flip-Cover Drain
Drain fitting with a flip-cover mechanism. Stainless steel construction with a polished finish and an overflow opening. Reference overall dimensions: 138 × 60 mm.
Y0004
Brushed Stainless Steel Tapered-Spout Tap
Stainless steel tap with a tapered outlet and a brushed finish. Made of 304 stainless steel, with reference overall dimensions of 8 × 8 cm.
V0003
Polished Tapered-Spout Tap
Tap with a tapered outlet and a polished finish. Copper body, with reference overall dimensions of 9.5 cm high and 8 cm wide.
V0002
Polished Flat-Spout Tap
Flat-spout tap with a polished finish. Copper body, with reference overall dimensions of 9.5 cm high and 8 cm wide.
V0001
Brushed Stainless Steel Floor Drain
Stainless steel floor drain with a brushed finish. 201 stainless steel panel, measuring 10 × 10 cm.
Y0001
Dual-Use Stainless Steel Washing-Machine Floor Drain
Brushed stainless steel floor drain in a dual-use washing-machine configuration. 201 stainless steel panel, measuring 10 × 10 cm.
Y0002
Gunmetal Flat-Lever Hot and Cold Basin Faucet
Copper-body basin faucet with a gunmetal finish and a flat single lever for hot and cold water connections, supplied individually. The basin and countertop in the image are for scene illustration only and are not included. Before installation, check the mounting opening, countertop thickness and hot/cold water connections.
V0014
3-Piece Non-Mortise Door Hinge Set
Non-mortise door hinge set with three hinges per set, available in black or grey. Both colours are options of the same product. Stainless steel construction. The image shows the selected finish for appearance; the supplied quantity is three hinges per set. Check the door, frame and fixing-hole positions before installation.
P0005 · 2 specification options
Single-Bowl Kitchen Sink Waste Kit · Pipe Size 50
Deluxe waste kit for a single-bowl kitchen sink, in pipe size 50, supplied as a set. Includes one waste head, the main waste body, an overflow connection hose and a flexible drain hose. The stainless steel waste head has a strainer basket and cover. The drain hose is PP, with a rectangular overflow fitting and a removable bottom cap on the lower body. The installation guide in this product's details gives a reference sink drain-opening diameter of 90 mm. Check the actual opening and overflow position before installation.
Y0031
Double-Bowl Kitchen Sink Waste Kit with 50 mm Pipe
Deluxe waste kit for a double-bowl kitchen sink, with a 50 mm drain-pipe diameter, supplied as a set. Includes two waste heads, the main waste body, twin-bowl connection pipework, an overflow connection hose and a flexible drain hose. Stainless steel waste heads and PP pipework, with strainer baskets, covers and a rectangular overflow fitting. The lower body has a removable bottom cap. The parameter sheet gives a reference sink drain-opening diameter of 90 mm. Check both bowl openings, spacing and overflow position before installation.
Y0030
Double-Bowl Kitchen Sink Waste Kit
Standard waste kit for a double-bowl kitchen sink, in pipe size 40, supplied as a set. Includes two waste heads, a twin-bowl connection pipe, an overflow connection hose and a flexible drain hose. The waste heads have strainer baskets and covers, with a rectangular overflow fitting. Before installation, check both sink drain openings, the bowl spacing and the overflow position.
Y0029
Single-Bowl Kitchen Sink Waste Kit
Standard waste kit for a single-bowl kitchen sink, with a 40 mm drain-pipe diameter, supplied as a set. Includes the waste body, overflow connection hose and flexible drain hose. Stainless steel waste head with PP drain piping, a basket strainer, a rectangular overflow connector and a removable clean-out cap. The detail sheet gives a reference sink drain-opening diameter of 90 mm. Check the actual opening and overflow shape before installation.
Y0028
Gunmetal Four-Mode Round Shower Set
Round overhead and handheld shower set with a gunmetal finish and a four-mode configuration.
W0009
Gunmetal Overhead and Handheld Shower Set
Gunmetal shower set with an overhead shower, handheld shower and shower mixer tap.
W0008
Gunmetal Hot and Cold Basin Faucet
Basin faucet with a gunmetal finish for hot and cold water connections. Copper body.
V0013
Polished Copper Basin Faucet
Copper basin faucet with a polished finish.
V0012
Stainless Steel Single-Bowl Kitchen Sink Set
Stainless steel single-bowl kitchen sink set, with external dimensions of 75 × 46 cm.
F0008
Polished Round-Rail Shower Set
Round-rail shower set with a handheld shower and mixer tap, with a polished finish. The mixer body is grade-59 brass, and the round shower rail is electroplated stainless steel.
W0007
Round Overhead Shower Set
Shower set combining a round overhead shower with a handheld shower. The mixer body is made of grade-59 brass. The shower rail has an electroplated and sealed finish, with a round overhead shower and handheld shower.
W0006
Polished Angle Valve
Angle valve with a polished finish, supplied individually. Equipped with a ceramic-disc cartridge and 1/2-inch inlet/outlet connections.
Y0027
304 Stainless Steel Kitchen Sink Set
304 stainless steel kitchen sink set with an integrated pressed drain design, available in 68 × 46 cm and 75 × 46 cm sizes. Features an overflow opening and an integrated drain outlet at the bottom.
F0006 · 2 specification optionsSeveral categories on one list?
Send us the list. LANVORA helps coordinate products, specifications and supply conditions across categories.